A-A-50223A
3.2 Components. The scales shall consist of the following components:
3.2.1 Weight beams. The weight beams shall be equipped as follows:
a. Two or three beams with hanging sliding poises or riders.
b. A fractional bar having a capacity of 1 gram, graduated in 0.01 gram increments, and provided with a sliding poise or rider.
c. An adjustment for setting zero point.
d. An adjustment means for leveling the scale when out of level condition affects accuracy.
3.2.2 Stirrup. The stirrup shall be corrosion-resistant steel, approximately 203.2 mm (8 inches)
high and approximately 101.6 mm (4 inches) wide.
3.2.3 Pan. The pan shall be made of aluminum, polypropylene, or corrosion-resistant steel. It shall be removable from the stirrup or be movable to a vertical position within the stirrup.
3.2.4 Platform. The platform for specific gravity determinations shall be adjustable.
3.2.5 Damping. Damping shall be incorporated into the scale and shall be achieved by one of the following methods: magnetic, air, or oil.
3.2.6 Accuracy. Accuracy shall not be affected by the scale being out of level.
3.2.7 Cover. A plastic cover designed to fit the scale shall be provided.
4. REGULATORY REQUIREMENTS
4.1 Recovered materials. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR).
5. PRODUCT CONFORMANCE PROVISIONS
5.1 Product conformance. The products provided shall meet the salient characteristics of this commercial item description, conform to the producer's own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial marketplace. The government reserves the right to require proof of such conformance.
5.2 Market acceptability. The product offered must have been previously sold either to the government or on the commercial market.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business